How to print your DOPE cards
See the free builder in 42 seconds: size your card, add your records, choose quantity and review the label PDF. No account required.
Build. Print. Go. — 42-second walkthrough
Software demonstration. This captioned walkthrough combines actual builder screenshots and a generated PDF. TEST is a placeholder, not shooting data. It is not a physical printer or phone test.
- Measure your card space and match unit labels to your source.
- Enter your own records, or leave fields blank to write in later.
- Choose the card quantity and paper or thermal label size.
- Check the output, then print a test at 100% / Actual size.
The example uses five 3 × 2.12-inch stock cards on three 4 × 6-inch labels: two cards on each of the first two labels, one on the last. Other formats and sizes can fit differently.
Read the video transcript ↓Build your free card →Thermal printing steps →Get blank PDFs →
Build. Print. Go. transcript
BUILD. PRINT. GO.
Free printable cards. No account.
Choose a format that fits your kit.
1. FIT YOUR SETUP
Set the card size and unit labels.
Measure first. Labels do not convert data.
2. ADD YOUR RECORDS
Type, paste or import your own data.
TEST is a demonstration placeholder.
CHECK YOUR CARD
Review the card before printing.
Or leave the fields blank to write on.
3. CHOOSE QUANTITY
5 stock cards = 3 thermal 4 × 6 labels.
Paper printing is available too.
YOUR LABEL PDF
Two cards on each full 4 × 6 label.
Print at 100% / Actual size. Test the fit.
BUILD YOUR FREE CARD
easydopecards.com
Your records. Within reach.
Build a matching kit
Use the same entries on stock, scope-cap and wallet cards. Watch the matching-kit demonstration and read the step-by-step guide →
Easy DOPE Cards formats the records you supply. It does not calculate ballistic values. For paper size, calibration and troubleshooting, use the full printing guide.